2007
Year
CUSTOM
Builder
33' (10.06m)
Length
1
Cabins

yatco anchor icon

Catamount II - 2007 33' CUSTOM Flying Tiger 10M
Milford Connecticut
$29,900 USD


Yacht for sale is a 2007 CUSTOM 33' "Catamount II" Flying Tiger 10M Racing Sailboat in Milford, Connecticut, United States.The Flying Tiger 10 M is a keelboat designed in 2005 by naval architect Robert H. Perry. Built by Bill Stevens at Hansheng Yachts in Xiamen China, and marketed by Hiptrader LLC, the FT10 is intended as an affordable one-design club racer. With its light displacement (4900 lbs), open transom, and bowsprit that supports a large masthead asymmetrical spinnaker it can be classified as a sportsboat. In order to allow manufacture in China and global distribution, the boat was designed to fit inside a standard shipping container.The idea of building an affordable 30 foot sport boat emerged in 2002 as a heated discussion topic in the on-line forum Sailing Anarchy. A group of avid one-design racers contributed to the definition of the requirements of a low cost 30 foot sport boat. The group guided Perry through the design of the Anarchy 30 concept boat. Starting from the Anarchy 30 Perry designed the Flying Tiger 10 M during the most part of 2005 in an open forum under the scrutiny and the input of the forum members, in a process that is probably unique in the history of American yacht building.

Get more information on this listing

LENGTH 33' (10.06m)
BUILDER CUSTOM
ASKING PRICE $29,900 USD
BUILT (REFIT) 2007
BEAM 9' 2" (2.79m)
DRAFT N/A
MX SPEED N/A
CRUISING SPEED N/A
CABINS 1
GROSS TONNAGE 0.00
DISPLACEMENT 4900 Lbs
LOCATION Milford Connecticut United States
Get more information on this listing

FULL SPECIFICATIONS

Overview

Manufacturer Provided Description

The Flying Tiger 10 meter was designed to fill a void in one-designed sport boats, namely affordability. In keeping with the cost factor, we were able to construct a boat utilizing technology where we felt it was needed most without incurring excessive cost.


INTERIOR
  • Large V-Berth In Bow Section
  • Oval Opening Hatch Above V-Berth
  • Salon w/2 Settee Berths, Chart Table/Sink And Galley Pump
  • 12Vdc Main Electrical Panel w/Breakers And Voltmeter.
  • Quarter Berths Aft Under Cockpit (2)
  • Interior Lighting
  • Storage Compartments Under All Berths

ENGINE
  • Adjustable Bracket For Lowering/Raising Outboard Motor
  • Compartment For 25 Lt. Fuel Tank
  • Compartment Vented With Electrical Blower
  • Engine Controls Recess Built Into Cockpit Starboard Side.
  • Bridge Deck Hinged Hatch Closure
  • TOHATSU 9.8hp Four Stroke - Electric start

DECK and HARDWARE
  • Vacuum bagged fiberglass sandwich core construction.
  • Carbon Fiber Mast
  • Carbon Fiber Boom
  • All interior bulkheads and furniture molded and cored fiberglass construction.
  • Primary Winches #40 Harken, Aluminum Drum
  • Secondary Winches #16 Harken, Aluminum Drum
  • Spinlock Rope Clutches (5)
  • 8 Inch Marelon Cleats (4)
  • Harken Adjustable Jib Leads
  • Harken Mainsheet Traveler w/Controls And Fine Adjuster
  • Plastimo Manual Bilge Pump Mounted In cockpit
  • Stainless Steel Bow Pulpit w/LED Navigational Lights
  • Stainless Steel Stern Pulpit w/LED Navigational Light
  • Stainless Steel Stanchions And Lifelines
  • Stainless Steel Handrails On Cabintop (2)
  • Stainless Steel Tiller w/Carbon Fiber Extension
  • Harken Winch Handles (2)

MAST and RIGGING
  • Mast, Boom And Prodder Carbon Fiber
  • 2 Sets Tapered Sweptback Spreaders.
  • Aluminum Foil Sections
  • 1X19 Stainless Steel Wire Rigging, Continuous.
  • Adjustable Backstay
  • Facnor Jib Roller Furler
  • Main, Jib And Spinnaker Halyards.
  • Main, Jib And Spinnaker Sheets
  • Main Outhaul, Cunningham and Boom Vang
  • Keel Hoist
  • BETTS aftermarket rudder

SAILS
MAIN SAILS:

  • Ullman Racing Main - 2017
  • Kevlar Main - Neil Pryde
  • Dacron Main - Neil Pryde
JIBS:

  • Brand New "in the box" by North - 2018 NEVER USED
  • Kevlar by Neil Pride - furling
  • Dacron by Neil Pryde - well used
SPINNAKERS:

  • Old Neil Pryde
  • Ullman - Regatta Only - good condition
  • Neil Pryde Code Zero - used in one regatta - 2018
SAIL AREA:

I : 39.25 ft

J : 12.08 ft

 P : 40.00 ft

 E : 14.58 ft

Listing Marketed by

Bill Kolkmeyer (CPYB)
Wm. J. Kolkmeyer Yachts, LLC
One High Street

Milford, Connecticut,
USA

More information or schedule a showing

Call Broker

Bill Kolkmeyer (CPYB)
Wm. J. Kolkmeyer Yachts, LLC